
| Photoelectric sensors | ||||||||||||||||||||||||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||||||||||||||||||||||
| Features | |||
| Sensor/detection principle: | Photoelectric proximity sensor, Background suppression | ||
| Dimensions (W x H x D): | 12 mm x 31.5 mm x 21 mm | ||
| Housing design (light emission): | Rectangular | ||
| Sensing range max.: | 5 mm ... 250 mm 1) | ||
| Sensing range: | 35 mm ... 140 mm | ||
| Type of light: | Visible red light | ||
| Light source: | PinPoint LED 2) | ||
| Wave length: | 650 nm | ||
| Adjustment: | Mechanical spindle, 5 turns | ||
| Light spot size (distance): | Ø 6 mm (100 mm) | ||
| 1) Object with 90 % reflectance (referred to standard white, DIN 5033) 2)Average service life of 100,000 h at TA = +25 °C |
| Mechanics/electronics | |||
| Supply voltage: | 10 V DC ... 30 V DC 1) | ||
| Residual ripple: | ± 10 % 2) | ||
| Power consumption: | ≤ 30 mA 3) | ||
| Output type: | PNP | ||
| Switching mode: | Light/dark switching | ||
| Switching mode selector: | Selectable via light/dark selector | ||
| Output current Imax.: | ≤ 100 mA 4) | ||
| Response time: | < 625 µs 5) | ||
| Switching frequency: | 1,000 Hz 6) | ||
| Connection type: | Cable, 3-wire, 2 m 7) | ||
| Cable material: | PVC | ||
| Conductor cross-section: | 0.14 mm² | ||
| Circuit protection: | A, B, D 8) 9) 10) | ||
| Protection class: | III | ||
| Weight: | 60 g | ||
| Polarisation filter: | - | ||
| Optics material: | PMMA | ||
| Enclosure rating: | IP 67 | ||
| Ambient operating temperature: | -25 °C ... +55 °C 11) | ||
| Ambient storage temperature: | -40 °C ... +70 °C | ||
| UL File No.: | NRKH.E348498 & NRKH7.E348498 | ||
| Signal voltage PNP HIGH/LOW: | VS - (≤ 3 V) / approx. 0 V | ||
| Housing material: | ABS/PC, Plastic | ||
| 1) Limit values, operation in short-circuit protected network max. 8 A 2) May not exceed or fall short of VS tolerances 3) Without load 4) At Vs > 24 V, IA max = 50 mA 5) Signal transit time with resistive load 6) With light/dark ratio 1:1 7) Do not bend below 0 °C 8) A = VS connections reverse-polarity protected 9) B = inputs and output reverse-polarity protected 10) D = outputs overcurrent and short-circuit protected 11) Temperature stability after adjustment +/-10°C |
品類齊全
省心省力,一站購齊
一對一客服
選型詢價,快速響應
貨期保障
多倉直發,貨期無憂
正品貨源
正品保障,誠信服務




